Adaptation in a variable parallel elastic actuator for rotary mechanisms towards energy efficiency

Abstract This paper is concerned with the presentation of a parallel compliance adaptation method for systems equipped with rotary motion mechanisms towards obtaining energy efficiency in cyclic tasks over a reasonable range of task frequency variations. In this work, we first introduce a variable parallel elastic actuator (VPEA) design for implementation on uni-directional joints that can respond in line with the torque requirements caused by frequency variations in rotary mechanisms. Then, in the next step, we propose two design approaches namely “general method” and “frequency-based method” for the VPEA along with the stiffness adjustment approaches both in offline and online manners. The optimality and convergence of the adaptation method for the proposed rotary VPEA are also analytically proved in general to be globally exponentially stable in the sense of Lyapunov. Finally, to demonstrate the applicability and efficiency of our VPEA, we deployed it in a robotic leg model as the case study. The simulation results demonstrate the stability and convergence of our adaptation rule and highlight the performance of the proposed VPEA in increasing energy efficiency over a wide range of task frequency variations.

[1]  Stefano Stramigioli,et al.  Parallel stiffness in a bounding quadruped with flexible spine , 2012, 2012 IEEE/RSJ International Conference on Intelligent Robots and Systems.

[2]  J Geeroms,et al.  Design and energetic evaluation of a prosthetic knee joint actuator with a lockable parallel spring , 2017, Bioinspiration & biomimetics.

[3]  André Seyfarth,et al.  Effects of unidirectional parallel springs on required peak power and energy in powered prosthetic ankles: Comparison between different active actuation concepts , 2012, 2012 IEEE International Conference on Robotics and Biomimetics (ROBIO).

[4]  Sadao Kawamura,et al.  Motion Control With Stiffness Adaptation for Torque Minimization in Multijoint Robots , 2014, IEEE Transactions on Robotics.

[5]  Santosh Devasia,et al.  Nonlinear passive cam-based springs for powered ankle prostheses , 2015 .

[6]  Majid Nili Ahmadabadi,et al.  Concurrent design of controller and passive elements for robots with impulsive actuation systems , 2019 .

[7]  Majid Nili Ahmadabadi,et al.  Adaptation in Variable Parallel Compliance: Towards Energy Efficiency in Cyclic Tasks , 2017, IEEE/ASME Transactions on Mechatronics.

[8]  Majid Nili Ahmadabadi,et al.  Parallel Compliance Design for Increasing Robustness and Efficiency in Legged Locomotion—Proof of Concept , 2019, IEEE/ASME Transactions on Mechatronics.

[9]  Vigen Arakelian,et al.  Improvement of balancing accuracy of robotic systems: Application to leg orthosis for rehabilitation devices , 2008 .

[10]  Leonid B. Freidovich,et al.  Parallel Elastic Actuators as a Control Tool for Preplanned Trajectories of Underactuated Mechanical Systems , 2010, Int. J. Robotics Res..

[11]  Martin Grimmer,et al.  Energetic and Peak Power Advantages of Series Elastic Actuators in an Actuated Prosthetic Leg for Walking and Running , 2014 .

[12]  James P. Schmiedeler,et al.  Design and control of a planar bipedal robot ERNIE with parallel knee compliance , 2008, Auton. Robots.

[13]  Antonio Bicchi,et al.  Embodying Desired Behavior in Variable Stiffness Actuators , 2011 .

[14]  D. Lefeber,et al.  Series and Parallel Elastic Actuation: Impact of natural dynamics on power and energy consumption , 2016 .

[15]  Bram Vanderborght,et al.  Energy Consumption of Geared DC Motors in Dynamic Applications: Comparing Modeling Approaches , 2016, IEEE Robotics and Automation Letters.

[16]  Majid Nili Ahmadabadi,et al.  An adaptable cat-inspired leg design with frequency-amplitude coupling , 2016, 2016 4th International Conference on Robotics and Mechatronics (ICROM).

[17]  M. N. Ahmadabadi,et al.  Reducing the Energy Cost of Human Running Using an Unpowered Exoskeleton , 2018, IEEE Transactions on Neural Systems and Rehabilitation Engineering.

[18]  Majid Nili Ahmadabadi,et al.  Profile Design of Parallel Rotary Compliance for Energy Efficiency in Cyclic Tasks , 2020, IEEE/ASME Transactions on Mechatronics.

[19]  Giorgio Grioli,et al.  Variable Stiffness Actuators: Review on Design and Components , 2016, IEEE/ASME Transactions on Mechatronics.

[20]  Bram Vanderborght,et al.  Series and Parallel Elastic Actuation: Influence of Operating Positions on Design and Control , 2017, IEEE/ASME Transactions on Mechatronics.

[21]  Majid Nili Ahmadabadi,et al.  Design and modeling of a compact rotational nonlinear spring , 2016, 2016 IEEE/RSJ International Conference on Intelligent Robots and Systems (IROS).

[22]  R. Ham,et al.  Compliant actuator designs , 2009, IEEE Robotics & Automation Magazine.

[23]  Bram Vanderborght,et al.  MACCEPA, the mechanically adjustable compliance and controllable equilibrium position actuator: Design and implementation in a biped robot , 2007, Robotics Auton. Syst..

[24]  André Seyfarth,et al.  A comparison of parallel- and series elastic elements in an actuator for mimicking human ankle joint in walking and running , 2012, 2012 IEEE International Conference on Robotics and Automation.

[25]  Ioannis Poulakakis,et al.  A Switchable Parallel Elastic Actuator and its Application to Leg Design for Running Robots , 2018, IEEE/ASME Transactions on Mechatronics.

[26]  Majid Nili Ahmadabadi,et al.  Benefiting From Kinematic Redundancy Alongside Mono- and Biarticular Parallel Compliances for Energy Efficiency in Cyclic Tasks , 2017, IEEE Transactions on Robotics.

[27]  Matthew M. Williamson,et al.  Series elastic actuators , 1995, Proceedings 1995 IEEE/RSJ International Conference on Intelligent Robots and Systems. Human Robot Interaction and Cooperative Robots.

[28]  Majid Nili Ahmadabadi,et al.  Parallel Compliance Design for Increasing Robustness and Efficiency in Legged Locomotion–Theoretical Background and Applications , 2021, IEEE/ASME Transactions on Mechatronics.

[29]  Antonio Bicchi,et al.  Variable Stiffness Actuators for Fast and Safe Motion Control , 2003, ISRR.

[30]  Hong-Sen Yan,et al.  Optimal Synthesis of Cam-Linkage Mechanisms for Precise Path Generation , 2006 .

[31]  Vigen Arakelian,et al.  Gravity compensation in robotics , 2016, Adv. Robotics.

[32]  Anirban Mazumdar,et al.  Parallel Elastic Elements Improve Energy Efficiency on the STEPPR Bipedal Walking Robot , 2017, IEEE/ASME Transactions on Mechatronics.

[33]  Martijn Wisse,et al.  Clutched Elastic Actuators , 2017, IEEE/ASME Transactions on Mechatronics.

[34]  D. F. B. Haeufle,et al.  A clutched parallel elastic actuator concept: Towards energy efficient powered legs in prosthetics and robotics , 2012, 2012 4th IEEE RAS & EMBS International Conference on Biomedical Robotics and Biomechatronics (BioRob).

[35]  Dirk Lefeber,et al.  Modeling and design of geared DC motors for energy efficiency: Comparison between theory and experiments , 2015 .