A new generation of ergonomic exoskeletons - The high-performance X-Arm-2 for space robotics telepresence

This paper introduces the mechatronic design and a first performance analysis of a new haptic exoskeleton, the X-Arm-2. The X-Arm-2 is a fully actuated force-reflecting human arm exoskeleton that is based on our previously proposed approach to ergonomic and human-centered exoskeleton design [1] [2]. The X-Arm-2 is a highly power-dense impedance-type haptic device that (1) can interact with natural human arm movement of varying operators without requiring adjustments and creating constraint forces, (2) provides crisp force-feedback through high actuator bandwidth, low residual friction and good joint torque sensor resolution, (3) has a low total mass of only 6.2 kg and (4) low inertia through a human-oriented mixed implementation of Bowden-cable relocated and directly-integrated DC actuators.

[1]  Craig R. Carignan,et al.  Development of an exoskeleton haptic interface for virtual task training , 2009, 2009 IEEE/RSJ International Conference on Intelligent Robots and Systems.

[2]  Andre Schiele,et al.  Fundamentals of ergonomic exoskeleton robots , 2008 .

[3]  Frans C. T. van der Helm,et al.  Towards Intuitive Control of Space Robots: A Ground Development Facility with Exoskeleton , 2006, 2006 IEEE/RSJ International Conference on Intelligent Robots and Systems.

[4]  A.H.A. Stienen,et al.  Dampace: dynamic force-coordination trainer for the upper extremities , 2007, 2007 IEEE 10th International Conference on Rehabilitation Robotics.

[5]  Hong Z. Tan,et al.  HUMAN FACTORS FOR THE DESIGN OF FORCE-REFLECTING HAPTIC INTERFACES , 1994 .

[6]  G. Visentin,et al.  The ESA Human Arm Exoskeleton for Space Robotics Telepresence , 2003 .

[7]  R. Riener,et al.  ARMin - Exoskeleton for Arm Therapy in Stroke Patients , 2007, 2007 IEEE 10th International Conference on Rehabilitation Robotics.

[8]  Andre Schiele.  Performance difference of Bowden Cable relocated and non-relocated master actuators in virtual environment applications , 2008, 2008 IEEE/RSJ International Conference on Intelligent Robots and Systems.

[9]  Frans C. T. van der Helm,et al.  Influence of attachment pressure and kinematic configuration on pHRI with wearable robots , 2009 .

[10]  F.C.T. van der Helm,et al.  Kinematic Design to Improve Ergonomics in Human Machine Interaction , 2006, IEEE Transactions on Neural Systems and Rehabilitation Engineering.