Learning to improve the path accuracy of position controlled robots

A learning method is presented which improves the dynamic accuracy of conventional industrial robots with integrated position control. The method is based on feedforward control being able to follow off-line programmed trajectories with high speed and negligible pose errors. For learning, the robot has to be moved along a given path. The algorithm then estimates a simple model. This model is used to build a controller which is able to modify positional commands, thus reducing the positional path error from some millimeters to approximately 0.2 mm for a Manutec r2 robot. This improvement is valid also for other, non-trained trajectories. For repetitive control of a single path the error is even lower. Measurements of path accuracy are verified using data of a force/torque sensor during tracking a known contour.<<ETX>>

[1]  David J. Reinkensmeyer,et al.  Model-based robot learning , 1988 .

[2]  Dimitry M. Gorinevsky Direct learning of feedforward control for manipulator path tracking , 1992, Proceedings of the 1992 IEEE International Symposium on Intelligent Control.

[3]  Friedrich Lange,et al.  Iterative self-improvement of force feedback control in contour tracking , 1992, Proceedings 1992 IEEE International Conference on Robotics and Automation.

[4]  Richard S. Sutton,et al.  Neuronlike adaptive elements that can solve difficult learning control problems , 1983, IEEE Transactions on Systems, Man, and Cybernetics.

[5]  H. Harry Asada,et al.  Teaching and learning of compliance using neural nets: representation and generation of nonlinear compliance , 1990, Proceedings., IEEE International Conference on Robotics and Automation.

[6]  Siegfried Bocionek,et al.  Learning Systems Behavior For The Automatic Correction And Optimization Of Off-line Robot Programs , 1992, Proceedings of the IEEE/RSJ International Conference on Intelligent Robots and Systems.

[7]  W. Thomas Miller,et al.  Sensor-based control of robotic manipulators using a general learning algorithm , 1987, IEEE J. Robotics Autom..

[8]  Suguru Arimoto,et al.  Selective learning with a forgetting factor for robotic motion control , 1991, Proceedings. 1991 IEEE International Conference on Robotics and Automation.