The Capability Map: a Tool to Analyze robot arm Workspaces

More and more systems are developed that include several robot arms, like humanoid robots or industrial robot systems. These systems are designed for complex tasks to be solved in cooperation by the robot arms. However, the capabilities of the individual robot arms to perform given tasks or the suitability of a multi-robot system for cooperative tasks cannot be intuitively comprehended. For planning complex tasks or designing robot systems, a representation of a robot arm's workspace is needed that allows to determine from which directions objects in the workspace can be reached. In this paper, the capability map is presented. It is a representation of a robot arm's kinematic capabilities in its workspace. The capability map is used to compare existing robot arms, to support the design phase of an anthropomorphic robot arm and to enable robot workcell planning.

[1]  Bertrand Tondu,et al.  A Seven-degrees-of-freedom Robot-arm Driven by Pneumatic Artificial Muscles for Humanoid Robots , 2005, Int. J. Robotics Res..

[2]  J. Angeles,et al.  Optimum architecture design of platform manipulators , 1991, Fifth International Conference on Advanced Robotics 'Robots in Unstructured Environments.

[3]  Roger W. Brockett,et al.  Kinematic Dexterity of Robotic Mechanisms , 1994, Int. J. Robotics Res..

[4]  Tsuneo Yoshikawa,et al.  Foundations of Robotics: Analysis and Control , 1990 .

[5]  Jingzhou Yang,et al.  Towards understanding the workspace of human limbs , 2004, Ergonomics.

[6]  Jadran Lenarčič,et al.  Some kinematic considerations for the design of robot manipulators , 1989 .

[7]  Kazuhito Yokoi,et al.  Reachable Space Generation of A Humanoid Robot Using The Monte Carlo Method , 2006, 2006 IEEE/RSJ International Conference on Intelligent Robots and Systems.

[8]  Karim Abdel-Malek,et al.  Placement of Robot Manipulators to Maximize Dexterity , 2004, Int. J. Robotics Autom..

[9]  Alin Albu-Schäffer,et al.  DLR's torque-controlled light weight robot III-are we reaching the technological limits now? , 2002, Proceedings 2002 IEEE International Conference on Robotics and Automation (Cat. No.02CH37292).

[10]  Konrad Paul Kording,et al.  Statistics of Natural Movements Are Reflected in Motor Errors , 2009, Journal of neurophysiology.

[11]  Phillip J. McKerrow,et al.  Introduction to robotics , 1991 .

[12]  Sami Haddadin,et al.  Towards Safe Robots - Approaching Asimov's 1st Law , 2013, Springer Tracts in Advanced Robotics.

[13]  Alin Albu-Schäffer,et al.  The DLR hand arm system , 2011, 2011 IEEE International Conference on Robotics and Automation.

[14]  Pyung Hun Chang,et al.  Task-oriented design of robot kinematics using the Grid Method , 2003, Adv. Robotics.

[15]  Gerd Hirzinger,et al.  Capturing robot workspace structure: representing robot capabilities , 2007, 2007 IEEE/RSJ International Conference on Intelligent Robots and Systems.

[16]  Richard M. Murray,et al.  A Mathematical Introduction to Robotic Manipulation , 1994 .

[17]  Charles A. Klein,et al.  Dexterity Measures for the Design and Control of Kinematically Redundant Manipulators , 1987 .

[18]  E. Saff,et al.  Distributing many points on a sphere , 1997 .

[19]  Robert H. Sturges,et al.  A Quantification of Machine Dexterity Applied to an Assembly Task , 1990, Int. J. Robotics Res..

[20]  Gerd Hirzinger,et al.  Inverse kinematics with closed form solutions for highly redundant robotic systems , 2009, 2009 IEEE International Conference on Robotics and Automation.

[21]  Septimiu E. Salcudean,et al.  Fast constrained global minimax optimization of robot parameters , 1998, Robotica.

[22]  Jadran Lenarčič,et al.  Kinematic Model for Determination of Human Arm Reachable Workspace , 2005 .