The DLR hand arm system

An anthropomorphic hand arm system using variable stiffness actuation has been developed at DLR. It is aimed to reach its human archetype regarding size, weight and performance. The main focus of our development is put on robustness, dynamic performance and dexterity. Therefore, a paradigm change from impedance controlled, but mechanically stiff joints to robots using intrinsic variable compliance joints is carried out.

[1]  H. Gray.  Anatomy, Descriptive and Surgical , 1858, Glasgow Medical Journal.

[2]  J. Edward Colgate,et al.  Design of components for programmable passive impedance , 1991, Proceedings. 1991 IEEE International Conference on Robotics and Automation.

[3]  Shigeki Sugano,et al.  Development of human symbiotic robot: WENDY , 1999, Proceedings 1999 IEEE International Conference on Robotics and Automation (Cat. No.99CH36288C).

[4]  Donald Russell,et al.  Implementation of variable joint stiffness through antagonistic actuation using rolamite springs , 1999 .

[5]  Masayuki Inaba,et al.  The design and control of the flexible spine of a fully tendon-driven humanoid "Kenta" , 2002, IEEE/RSJ International Conference on Intelligent Robots and Systems.

[6]  Kikuo Fujimura,et al.  The intelligent ASIMO: system overview and integration , 2002, IEEE/RSJ International Conference on Intelligent Robots and Systems.

[7]  Toshikazu Kawasaki,et al.  Design of prototype humanoid robotics platform for HRP , 2002, IEEE/RSJ International Conference on Intelligent Robots and Systems.

[8]  Alin Albu-Schäffer,et al.  A Unified Passivity-based Control Framework for Position, Torque and Impedance Control of Flexible Joint Robots , 2007, Int. J. Robotics Res..

[9]  Pedram Afshar,et al.  On the design of robotic hands for brain-machine interface. , 2006, Neurosurgical focus.

[10]  Gerd Hirzinger,et al.  Flexible Signal-Oriented Hardware Abstraction for Rapid Prototyping of Robotic Systems , 2006, 2006 IEEE/RSJ International Conference on Intelligent Robots and Systems.

[11]  Alin Albu-Schäffer,et al.  Safety Evaluation of Physical Human-Robot Interaction via Crash-Testing , 2007, Robotics: Science and Systems.

[12]  Masayuki Inaba,et al.  An advanced musculoskeletal humanoid Kojiro , 2007, 2007 7th IEEE-RAS International Conference on Humanoid Robots.

[13]  Gerd Hirzinger,et al.  Feedback linearization and simultaneous stiffness-position control of robots with antagonistic actuated joints , 2007, Proceedings 2007 IEEE International Conference on Robotics and Automation.

[14]  G. Hirzinger,et al.  A new variable stiffness design: Matching requirements of the next robot generation , 2008, 2008 IEEE International Conference on Robotics and Automation.

[15]  Alin Albu-Schäffer,et al.  Impedance control for variable stiffness mechanisms with nonlinear joint coupling , 2008, 2008 IEEE/RSJ International Conference on Intelligent Robots and Systems.

[16]  Giorgio Grioli,et al.  VSA-II: a novel prototype of variable stiffness actuator for safe and performing robots interacting with humans , 2008, 2008 IEEE International Conference on Robotics and Automation.

[17]  Patrick van der Smagt,et al.  Antagonism for a Highly Anthropomorphic Hand–Arm System , 2008, Adv. Robotics.

[18]  Stefan Jörg,et al.  The Virtual Path: The Domain Model for the Design of the MIRO Surgical Robotic System , 2009, SyRoCo.

[19]  Shigeki Sugano,et al.  Design of human symbiotic robot TWENDY-ONE , 2009, 2009 IEEE International Conference on Robotics and Automation.

[20]  Alin Albu-Schäffer,et al.  New insights concerning intrinsic joint elasticity for safety , 2010, 2010 IEEE/RSJ International Conference on Intelligent Robots and Systems.

[21]  Roland Siegwart,et al.  A Method for Hand Kinematics Designers7 Billion Perfect Hands , 2010 .

[22]  Gerd Hirzinger,et al.  The thumb: guidelines for a robotic design , 2010, 2010 IEEE/RSJ International Conference on Intelligent Robots and Systems.

[23]  Alin Albu-Schäffer,et al.  Bidirectional antagonistic variable stiffness actuation: Analysis, design & Implementation , 2010, 2010 IEEE International Conference on Robotics and Automation.

[24]  Berthold Bäuml,et al.  Kinematically optimal catching a flying ball with a hand-arm-system , 2010, 2010 IEEE/RSJ International Conference on Intelligent Robots and Systems.

[25]  Roland Siegwart,et al.  Antagonistically driven finger design for the anthropomorphic DLR Hand Arm System , 2010, 2010 10th IEEE-RAS International Conference on Humanoid Robots.

[26]  Alin Albu-Schäffer,et al.  On joint design with intrinsic variable compliance: derivation of the DLR QA-Joint , 2010, 2010 IEEE International Conference on Robotics and Automation.

[27]  Oliver Eiberger,et al.  The DLR FSJ: Energy based design of a variable stiffness joint , 2011, 2011 IEEE International Conference on Robotics and Automation.

[28]  Alin Albu-Schäffer,et al.  State feedback damping control for a multi DOF variable stiffness robot arm , 2011, 2011 IEEE International Conference on Robotics and Automation.

[29]  Robert O. Ambrose,et al.  Robonaut 2 - The first humanoid robot in space , 2011, 2011 IEEE International Conference on Robotics and Automation.