Simulation and Multiobjective Optimization of an Industrial Hydrogen Plant Based on Refinery Off-Gas

A rigorous model is developed for simulating an existing industrial hydrogen plant based on refinery off-gas, which is made up of liquefied petroleum gas and off-gas from the membrane separation unit in a petroleum refinery. The presence of higher hydrocarbons in the reaction system is accounted for in the model equations for bulk gas and catalyst pellet. The reformer model is validated against three sets of industrial plant data, with good agreement. Thereafter, multiobjective optimization is performed using the nondominated sorting genetic algorithm to predict sets of Pareto-optimal operating conditions for improved performance. For a fixed feed rate of off-gas to the unit, two or three objectives, namely, maximization of product hydrogen and export steam rates and minimization of the heat duty supplied to the steam reformer, are targeted simultaneously. The optimal heat flux profile in the steam reformer is distinct from that predicted for methane feed (Oh, P. P.; Ray, A. K.; Rangaiah, G. P. J. Chem. Eng. Jpn. 2001, 34 (11), 1341. The optimal results obtained are better than industrial operating data.

[1]  Ajay K. Ray,et al.  Triple-Objective Optimization of an Industrial Hydrogen Plant , 2001 .

[2]  Ajay K. Ray,et al.  Multi-objective optimization of industrial hydrogen plants , 2001 .

[3]  Ajay K. Ray,et al.  Multiobjective optimization of steam reformer performance using genetic algorithm , 2000 .

[4]  Daniel Tondeur,et al.  A method to obtain a compact representation of process performances from a numerical simulator: example of pressure swing adsorption for pure hydrogen production , 1995 .

[5]  Kalyanmoy Deb,et al.  Muiltiobjective Optimization Using Nondominated Sorting in Genetic Algorithms , 1994, Evolutionary Computation.

[6]  Said S.E.H. Elnashaie,et al.  Modelling, Simulation and Optimization of Industrial Fixed Bed Catalytic Reactors , 1994 .

[7]  Said S.E.H. Elnashaie,et al.  Mathematical modelling and computer simulation of industrial water-gas shift converters , 1989 .

[8]  E. I. Ko,et al.  Propane Hydrogenolysis Over Supported Nickel Catalysts: Structural and Support Effects. , 1989 .

[9]  T. W. Hoffman,et al.  The hydrogenolysis of n-butane on a nickel on silica catalyst: I A Kinetic model , 1972 .

[10]  D. L. King,et al.  What should an owner/operator know when choosing an SMR/PSA plant? : Feedstocks products and terminals : A special report , 2000 .

[11]  Ajay K. Ray,et al.  APPLICATIONS OF MULTIOBJECTIVE OPTIMIZATION IN CHEMICAL ENGINEERING , 2000 .

[12]  Kalyanmoy Deb,et al.  MULTI-OBJECTIVE FUNCTION OPTIMIZATION USING NON-DOMINATED SORTING GENETIC ALGORITHMS , 1994 .

[13]  G. Froment,et al.  Coupled simulation of heat transfer and reaction in a steam reforming furnace , 1989 .

[14]  A. M. Meziou,et al.  Modelling, simulation and sensitivity analysis of steam-methane reformers , 1989 .

[15]  G. Froment,et al.  Methane steam reforming, methanation and water‐gas shift: I. Intrinsic kinetics , 1989 .

[16]  Jens R. Rostrup-Nielsen,et al.  Catalytic Steam Reforming , 1984 .

[17]  Singh C.P.P.,et al.  Simulation of Side Fired Steam-Hydrocarbon Reformers , 1979 .

[18]  M. Hyman.  SIMULATE METHANE REFORMER REACTIONS , 1968 .

[19]  J. Sinfelt,et al.  Catalysis over Supported Metals. III. Comparison of Metals of Known Surface Area for Ethane Hydrogenolysis , 1965 .