Generation of Compliant Mechanisms using Hybrid Genetic Algorithm

Compliant mechanism is a single piece elastic structure which can deform to perform the assigned task. In this work, compliant mechanisms are evolved using a constraint based bi-objective optimization formulation which requires one user defined parameter (η). This user defined parameter limits a gap between a desired path and an actual path traced by the compliant mechanism. The non-linear and discrete optimization problems are solved using the hybrid Genetic Algorithm (GA) wherein domain specific initialization, two-dimensional crossover operator and repairing techniques are adopted. A bit-wise local search method is used with elitist non-dominated sorting genetic algorithm to further refine the compliant mechanisms. Parallel computations are performed on the master-slave architecture to reduce the computation time. A parametric study is carried out for η value which suggests a range to evolve topologically different compliant mechanisms. The applied and boundary conditions to the compliant mechanisms are considered the variables that are evolved by the hybrid GA. The post-analysis of results unveils that the complaint mechanisms are always supported at unique location that can evolve the non-dominated solutions.

[1]  Ole Sigmund,et al.  On the Design of Compliant Mechanisms Using Topology Optimization , 1997 .

[2]  M. Bendsøe.  Optimal shape design as a material distribution problem , 1989 .

[3]  Hai Huang,et al.  Improved genetic algorithm with two-level approximation for truss topology optimization , 2014 .

[4]  Kalyanmoy Deb,et al.  Towards generating diverse topologies of path tracing compliant mechanisms using a local search based multi-objective genetic algorithm procedure , 2008, 2008 IEEE Congress on Evolutionary Computation (IEEE World Congress on Computational Intelligence).

[5]  M. Jakiela,et al.  Genetic algorithm-based structural topology design with compliance and topology simplification considerations , 1996 .

[6]  T. Ray,et al.  Design Synthesis of Path Generating Compliant Mechanisms by Evolutionary Optimization of Topology and Shape , 2002 .

[7]  Noboru Kikuchi,et al.  TOPOLOGY OPTIMIZATION OF COMPLIANT MECHANISMS USING THE HOMOGENIZATION METHOD , 1998 .

[8]  Xiaoming Wang,et al.  A level set method for structural topology optimization , 2003 .

[9]  M. Bendsøe,et al.  Generating optimal topologies in structural design using a homogenization method , 1988 .

[10]  K. Deb.  An Efficient Constraint Handling Method for Genetic Algorithms , 2000 .

[11]  Kalyanmoy Deb,et al.  A domain-specific crossover and a helper objective for generating minimum weight compliant mechanisms , 2008, GECCO '08.

[12]  Y. Xie,et al.  A simple evolutionary procedure for structural optimization , 1993 .

[13]  Akira Todoroki,et al.  Elite-initial population for efficient topology optimization using multi- objective genetic algorithms , 2013 .

[14]  Mary Frecker,et al.  Topological synthesis of compliant mechanisms using multi-criteria optimization , 1997 .

[15]  DebK.,et al.  A fast and elitist multiobjective genetic algorithm , 2002 .

[16]  Kalyanmoy Deb,et al.  Domain-specific initial population strategy for compliant mechanisms using customized genetic algorithm , 2011 .

[17]  Kalyanmoy Deb,et al.  An Improved Initial Population Strategy for Compliant Mechanism Designs Using Evolutionary Optimization , 2008, DAC 2008.

[18]  O. Sigmund,et al.  Design and fabrication of compliant micromechanisms and structures with negative Poisson's ratio , 1996, Proceedings of Ninth International Workshop on Micro Electromechanical Systems.

[19]  J. Sethian,et al.  Structural Boundary Design via Level Set and Immersed Interface Methods , 2000 .

[20]  M. Jakiela,et al.  Continuum structural topology design with genetic algorithms , 2000 .

[21]  Sridhar Kota,et al.  Topology and Dimensional Synthesis of Compliant Mechanisms Using Discrete Optimization , 2006 .

[22]  Kazuhiro Saitou,et al.  Genetic algorithms as an approach to configuration and topology design , 1994, DAC 1993.

[23]  G. K. Ananthasuresh,et al.  Optimal Synthesis Methods for MEMS , 2003 .

[24]  Bin Xu,et al.  Integrated optimization of structural topology and control for piezoelectric smart plate based on genetic algorithm , 2013 .

[25]  Alaa Chateauneuf,et al.  An improved robust topology optimization approach using multiobjective evolutionary algorithms , 2013 .

[26]  Mark J. Jakiela,et al.  Generation and Classification of Structural Topologies With Genetic Algorithm Speciation , 1997 .

[27]  Kalyanmoy Deb,et al.  Customized evolutionary optimization procedure for generating minimum weight compliant mechanisms , 2014 .

[28]  Kalyanmoy Deb,et al.  A fast and elitist multiobjective genetic algorithm: NSGA-II , 2002, IEEE Trans. Evol. Comput..

[29]  Tian-bing Tang,et al.  Truss optimization on shape and sizing with frequency constraints based on parallel genetic algorithm , 2011 .

[30]  Sridhar Kota,et al.  Strategies for systematic synthesis of compliant mems , 1994 .